Best Benchtop Drill Presses

Wen 4214 12-Inch Variable Speed Drill Press,Orange

WEN 4214 12-Inch Variable Speed Drill Press,Orange
WEN 4214 12-Inch Variable Speed Drill Press,Orange Infinitely variable speed ranges from 580-3200 RPMS. Mechanical variable speed delivers equal torque throughout the range. LED read out displays speed. Spindle Travel of 3-1/8″ with easy to read, locking linear depth stop for accurate and repeatable drilling operations. Front to the back of the motor is 22 inches Quill diameter of 2.17 inches. Durable 2/3hp induction motor develops ample torque and power. Motor: 120 V, 60 Hz. Laser Module: Class III 9-1/2 x 9-1/2″ cast iron worktable features rack & pinion height adjustment and bevels up to 45 Degree left & right. Width with the handles: 14-1/2″ Includes drill press, mechanical variable speed, laser, table roller extension, 5/8″ keyed chuck & key, tools for assembly. Drill press Height from the Floor to the top: 37 inch
  • Infinitely Variable Speed Ranges From 580-3200 Rpms. Mechanical Variable Speed Delivers Equal Torque Throughout The Range. Led Read Out Displays Speed.
  • Spindle Travel Of 3-1/8 With Easy To Read Locking Linear Depth Stop For Accurate And Repeatable Drilling Operations. Front To The Back Of The Motor Is 22 Inches
  • Quill Diameter Of 2.17 Inches. Durable 2/3Hp Induction Motor Develops Ample Torque And Power. Motor 120 V 60 Hz. Laser Module Class Iii
  • 9-1/2 X 9-1/2 Cast Iron Worktable Features Rack & Pinion Height Adjustment And Bevels Up To 45 Degree Left & Right. Width With The Handles 14-1/2
  • Includes Drill Press Mechanical Variable Speed Laser Table Roller Extension 5/8 Keyed Chuck & Key Tools For Assembly.Drill Press Height From The Floor To The Top 37 Inch

Looking for a drill press that has infinitely variable speeds and can handle a lot of drilling? Look no further than the WEN 4214 12-Inch Variable Speed Drill Press. This drill press has a mechanical variable speed that delivers equal torque throughout the range, making it perfect for precision drilling. The LED read out displays speed, so you can always be sure of the correct setting. The drill press also has a spindle travel of 3-1/8″, making it easy to get the job done. Plus, the front to the back of the motor is 22 inches, making it easy to work with. The drill press also has a durable 2/3hp induction motor that delivers ample torque and power.

Wen Cv414 4.25 In. Compound Cross Slide Industrial Strength Benchtop And Drill Press Vise, Black

WEN CV414 4.25 in. Compound Cross Slide Industrial Strength Benchtop and Drill Press Vise, Black
The Wen CV414 4.25 in. Compound Cross Slide Industrial Strength Benchtop and Drill Press Vise is a benchtop vise that is designed to be used with industrial-strength drill presses. The vise has jaws that open up to 4.125 in. wide, and it is constructed of industrial-strength powder-coated cast iron. The hand wheels feature machine-marked 0.1 mm increments for maximum precision. The jaws travel 5.8 in. left and right and 6 in. front and back. The vise is universal design compatible with the majority of drill presses on the market, and it has dimensions of 1.25 in. by 4.25 in. The Wen CV414 4.25 in. Compound Cross Slide Industrial Strength Benchtop and Drill Press Vise is a great option for use with drill presses.
  • 4.25 By 1.25 In. Jaws Open Up To 4.125 In. Wide
  • Constructed Of Industrial-Strength Powder-Coated Cast Iron
  • Hand Wheels Feature Machine-Marked 0.1 Mm Increments For Maximum Precision
  • Jaws Travel 5.8 In. Left And Right And 6 In. Front And Back
  • Universal Design Compatible With The Majority Of Drill Presses On The Market (See Images For Base Dimensions)

Looking for a powerful bench vise that can handle your toughest drilling tasks? Look no further than the WEN CV414 4.25 in. Compound Cross Slide Industrial Strength Benchtop and Drill Press Vise! This vise is made out of industrial-strength powder-coated cast iron and features hand wheels that have machine-marked 0.1 mm increments for maximum precision. The jaws open up to 4.125 in. wide and travel 5.8 in. left and right and 6 in. front and back. This vise is compatible with the majority of drill presses on the market, and its base dimensions are 4.25 by 1.25 in.

Bilt Hard 10 In Drill Press With 2.5″ Drill Vise, 12 Speed 3/4Hp Benchtop Drill Machine, Csa Listed

  • Positive Item 1
  • Positive Item 2
  • Negative Item 1
  • Negative Item 2

This is a powerful 10 inch drill press with a 6.2A 3/4 HP motor. It has a 10 inch swing and 2-9/25″ spindle travel, and is CSA listed. It has a safety certificate and is useful for woodworking. It has 12 variable speeds, and is sturdy construction with a steel frame and a steel base. It has a plastic top cover, and a 90-day warranty.

Best Benchtop Drill Presses

Best Benchtop Drill Presses

Share All Sharing Options For: The 5 Benchtop drill presses are powerful wood and metalworking tools used to bore precise holes with minimal effort. These drill presses are especially useful in projects where repetitive drilling is required. The purpose of a benchtop drilling press is simple, but different drill bit sizes and models can have an impact on the effectiveness of the drill press.

This Old House Reviews researched all the available benchtop drill press models on Amazon in order to assist you with your decision. Here are our top picks:

Speeds of the Best: WEN Variable Speed Drill Press

Save 24% on

At the time of publishing, prices are correct

WEN’s benchtop drill machine allows you to regulate your drill speed and set the material. This drill press comes with a 2-year warranty. It also includes a worktable. A digital speed display allows you to view your precise RPM before drilling.

305 on Amazon

12-inch drill press

580-3,200 RPM variable operation

2-year limited warranty

Best Benchtop Drill Presses

These are the 7 best drill presses of 2022

Our editors independently research, test, and recommend the best products; you can learn more about our . You may be eligible for commissions if you make a purchase through one of our selected links.

Spruce / Chloe Jeong Drill Presses are stationary tools. While some stand on the floor, others use a workbench. Each has a platform with a strong and adjustable base to support the object being drilled and an overhead Chuck that keeps the bit in its place. A drill press can be used to make holes in wood and other hard surfaces, much like a handheld handheld drill. However, drill presses are more powerful than handheld drills.

If you only need to drill small holes in wood, a handheld drill will suffice. Drill presses are the best tool for drilling holes in very hard wood or other metal.

You should take a few things into consideration when selecting a drill press. One is the swing, which tells you the widest board or other material the drill press can hold while drilling a hole right in the middle. The stroke distance is another measurement that shows how deep a drill press can make a hole without needing to flip or rearrange the material.

This list includes the top-rated drill presses currently available. We then narrowed down our choices to those that we believe are the best within their respective areas. Here are the best drill presses on the market.

Our Top Picks WEN Variable Speed Drill Press at Amazon This powerful, straightforward drill press will tackle all of your shop needs with ease.

Eurotool Small Benchtop Drill Press at Amazon

This small drill press is perfect for jewelry making, model-making, and any other crafting or hobby projects.

Dremel 220-01 Drill Press at Amazon

To ensure stability, the workstation is designed to fit into a standard worktable. It does not take up valuable space.

Profil Menu

These brutes are half as powerful and as efficient as the floor-standing models, but they do the job just as well — at half the cost.

drill press opener Thinking about buying a floor-model drill press? You should consider this: Just about all woodworking drills require the table to be located within 4 inches from the chuck. A benchtop drill can not only handle the majority of your drilling needs, but also comes at a fraction of the cost of a floor-standing machine.

Although they are small, the benchtop machines can handle larger workpieces than full-size presses. We measured the swings of all eight machines. They ranged from 12-14 inches to the floor-model’s 17″ average. 7 machines offer at most a 3 inch stroke. This allows you to plunge as deep as possible. Stationary presses can have strokes ranging from 31/ 3 to 5 inches. Although some testers might have less motors than others, they all have between 1/- and 3/-hp motors. These are the same as those found in floor presses.

The drill presses were tested to verify that their horsepower ratings could be converted into drilling power. We force fed the drill presses hard maple syrup and white oak to ensure they stall. The motor did not stall or slip during these tests, so drill presses equipped with three pulleys performed best. Because their large V-belts transmit power efficiently from the pulleys and spindle, the two variable-speed unit performed very well. For speed changes, you just can’t beat the ease of variable-speed controls, which eliminate the nuisance of moving belts to make speed changes, which can be difficult, especially on taller models.

A reliable, sturdy stop should be included in every drill press for drilling several holes at the same depth. These units feature two different styles of depth stops: a threaded rod on the left side of the head, or a dial stop on the handle shaft. We drilled 100 holes in each unit using a 3″ Forstner bit. Then, we measured the depths of the last and first holes with a digital scale. In our tests, threaded stops with locking nut performed perfectly. But we had mixed results using the dial stops.

Lasers prove helpful. Many drill presses have bright-red crosshair LEDs that can be used to align your bit. After calibration, the lasers proved to be accurate at marking any bit’s centrepoint.

Handle leverage proves critical for larger bits. For large bits, a long handle is more powerful than a shorter one for a drill machine. The handles on some models proved uncomfortably short.

You will need patience when mortifying with these presses. There are mortising attachments that can be used on almost all of these presses. But between removing equipment (lasers, chuck guards, etc.) It’s not worth it to move the attachment around, adjust the depth stops and add and align a fence.

Switches do make a difference. It takes only a power switch for a machine to be turned on and off. But it matters most when you need it in an emergency. The front-mounted paddle style switches we like are the easiest to use, particularly if it’s not possible for you to look at your computer.

Top Tools: Delta DP350 and Grizzly G0485. Top Value: Ryobi DP121L. Read the November 2007 issue WOOD magazine to see the results of our testing the Craftsman 221914, Delta DP300L, and DP350.

Best Benchtop Drill Presses

Anna Ryan

Anna Ryan works as a copywriter, editor and writer. This writer has broad knowledge that has allowed her to write in many genres such as article and blog writing.

As an editor, she has polished and perfected an array of pieces for diverse readerships and audiences.

If you buy products from the links we provide, our brand partners might pay commission.

There are some tools that you must have in your workshop and a benchtop drill press is one of them. Because they’re so useful, benchtop drill presses are common in workshops across the globe. Floor-standing drill presses have often been suggested to anyone who works with metal and wood. This isn’t always necessary.

In most cases, a table within four inches of the chuck is good enough so you can use a benchtop press instead. These kinds of drill presses are cheaper than floor-standing models while still providing the same features and power. Many benchtop drill machines are on sale, and it is not easy to determine which one will work best for your needs.

The ten most effective benchtop drill machines for any workshop were chosen based on customer opinions and company information.

1. WEN 4214 12 Inch Variable Speed Drill press This benchtop drill presse is extremely powerful and can work on both wood and metal. The variable speed settings allow for users to set the RPM of their material so that they can achieve a precise cut. You can monitor the speed with the digital LED indicator on this benchtop drill press. A work light is included onboard to help you keep track.

A table roller extension can be added to this benchtop drill machine, providing support for up 17-inches. You can easily adjust the depth gauge to obtain precise measurements for cutting metals, plastics, or wood.

The benchtop drill presse is powerful, has adjustable speeds and can be used to make precise measurements.

Amazon 2 Pricing Guide JET J-2530 Bench Top Drill Press The benchtop drill presse is simple but powerful. You can use this benchtop drill machine with a 40 inch bench chuck. It also measures 63 inches above the floor. The basic benchtop drill is still very accurate and it can be used to cut a variety materials. This machine is heavy duty and easy to assemble.

Both weight and size

Benchtop drill presses are made to be smaller and, therefore, more compact than their standing counterparts. They can also be used in smaller workshops or homes. If you are planning on using your benchtop drill press in your home workshop, then you will want to consider both the weight and size of the device.

How easy your benchtop drill press is to move around in the workshop will depend on its weight. To make sure you always have access and control to your full workbench, a drill you can move around is key.

Because of this, it is crucial to think about the size. It will impact how compact the drill is and how much storage space you’ll need. For small workshop spaces, benchtop drill presses work best. Make sure to choose one with sufficient space for everything you need.

Best Benchtop Drill Presses

Review of 9 Top Drill Presses for Your Workshop. (2021).

What is the best drill press for your workshop? If you’re looking at buying a new drill press, you are in the right place.

Browse through our drill press reviews before making a decision. Our aim is to help you get the best value for money by giving you everything you need to make a well-informed choice resulting in you owning the best drill press for your needs.

A variety of uses can be made for drill presses. There are many drill presses to choose from. They vary in their size, power, portability and very importantly, pricing.

We are happy to share our drill press reviews with you. This will make it easier for you to purchase the right product and provide you the most value. has all content copied by Republishing is against the law. Amazon Associate earns from qualifying orders and this site contains ads.

Advertise with Us

You will need to consider your specific needs. You will also need to think about how much storage space your drill press needs.

You don’t have to be concerned about how big the drill press will fit in your space. However, those who are limited by space, such as a small work bench, may prefer the benchtop-style drill press.

Your budget is also one of the most crucial factors in determining which model is right for you. These factors mean that prices and design details can vary greatly from one model to the next.

You can read the following guide to learn all you need about how to find the best drill presses for your needs.

#7 Commercial Use: Powermatic Pm2800B

As you can see, the Powermatic PM2800B drilling press is impressive. Powermatic has a reputation for quality and long-lasting products. It is a great drill press for professionals.

This drill press is ideal for professionals who need a powerful drill press. Because it has mechanical variable speed, no belt change is required.

This drill bit features a digital speed reading that shows you how fast the drill bit is operating. Powermatic PM2800B’s Adjustable Stop is unlike any other. It makes repeat drilling effortless.

Motor-wise, this motor packs a serious punch. This motor has 1 horsepower, which means it is capable of supplying all your power needs. The swing distance is 18 inches, they don’t come much bigger than this, so you need to have a lot of space in your workshop for this drill press.

Overall, an extremely quality machine that has some serious power. The machine weighs 266 lbs and is very heavy, so you should only buy it if youre a professional.

#8 Budget Drill Press Grizzly G7943 Benchtop Drill Press Grizzly G7943 A 12 in. benchtop drill machine, the Grizzly G7943 can be used by both professionals and casual users.

This benchtop drill from Grizzly proves to be reliable and sturdy. The motor is a powerful 3/4 HP and can be used for all tasks. This drill press measures 12 inches in length and is very portable. It can be easily stored on your workbench.

Best Benchtop Drill Presses

Reviewed Best Bench Top Drill Press

1. WEN4214 12-Inch Benchtop Drill Press. When it comes to the Best Benchtop Drill Press candidates, WEN4214 must be on your list. This thing might cost you less than some of the more popular brands, it is certainly no pushover when it comes to performance and longevity.

You can expect a good amount of power through the 2/3 HP motor that it carries. This motor can perform many tasks. The WEN 4214 is a great tool for drilling through hard plastic.

With this, the fastest speed I can get is 580 RPM. Now that surely isn’t too slow. Although I can drill through half-inch of sheet steel, this is not too slow. The highest speed this one manages to achieve is 3200 RPM. It is also faster than the benchtop drill presses.

The spindle allows you to drill deep holes using WEN 42214. You can do DIY woodworking projects in your home with the spindle’s length of 3-1/8″.

How do you manage your work hours?

It is 9-1/2″ x 9-1/2″. This is ample space on the table to tackle any task without worrying for comfort if you ask me. The tilt can be adjusted to move the table 45° left/right. You can enjoy some comfort and unique angles as you drill.

2/3 HP Motor is a big boost when it comes to power.

This thing is eligible for woodworking, metal sheet, and hard plastic drilling.

These speed ranges prove to be quite useful.

The table is spacious and grants you stability while you work.

.Best Benchtop Drill Presses